Image sourced from


The roofing and cladding choice for New Zealanders across the country. It’s designed for both moderate inland conditions and severe coastal environments. Appropriate for roofing, cladding, gutters, downpipes, and fences. 


To the steel core of each Colorsteel® Endura® prepainted steel sheet, a Zincalume® coating has been applied. The zinc and aluminium in this Zincalume® steel coating combine together to provide both stable corrosion protection overall and galvanic protection on cut edges. In conjunction with the primer and top paint coats, this means the investment in your new roof will be assured for many years to come.

*Ideal for moderate to severe environments (determined by your property’s proximity to the coast, geothermal areas and industrial environments)
*Base metal thickness is typically 0.40mm or 0.55mm
*Available in all Colorsteel colours


Please note that the colours below are indicative and will vary depending on your screen resolution and/or print quality. We recommend you request a sample from your nearest Steelformers branch.



















Be sure to contact a Steelformers representative to check stock levels of your chosen colour prior to ordering.



Limitations Of Use
Colorsteel® Endura® products are not recommended for use in very severe environments, i.e. within 100m of breaking surf or corrosive industrial emissions. (Very severe marine environments are characterised by heavy salt deposits and the almost constant smell of salt spray in the air.) Refer to New Zealand Steel’s Environmental Categories Guide for further information on the definition of corrosive environments. (For very severe environments, Colorsteel® Maxx® material may be suitable). Before using Colorsteel® Endura® products near sources of industrial pollution or in geothermal areas, consult a Steelformers representative.

Colorsteel® Endura® products should not be used in the following applications:
*Embedded in concrete
*In contact with permanently wet materials
*Water tanks
*In contact with soil, bark or similar
*As concrete formwork
*In intensive animal shelters

Copper or brass pipes must not be allowed to discharge onto Colorsteel® prepainted steel products or be allowed to come into contact with them. The use of other materials in proximity to Colorsteel® prepainted steel products must be in accordance with the New Zealand Steel Specifiers and Builders Guide. Mixing of brands of prepainted material on the same building is not recommenced by New Zealand Steel Limited.


Warranty and Maintenance
Colorsteel® products are produced and warranted by New Zealand Steel. The warranty is dependent on two important factors:
*Having the right product for the right environment
*Ensuring you maintain the product as per the Colorsteel® mainetenance recommendations.

Please ensure you enquire with a Steelformers representative to ensure you have chosen the right solution for your environment.

To find out more information on Colorsteel® Endura® Warranties and Maintenance, download NZ Steels brochure by clicking on the link below:
*New Zealand Steel: Environmental Categories, Warranty and Product Maintenance Recommendations


A moderate environment is characterised by:
*Little or no salt deposits
*The occasional smell of salt in the air
*Typically starts 500-1000 metres from breaking surf such as is found on exposed coasts, or in the immediate vicinity of calm salt water such as estuaries



A severe environment is characterised by:
*Little salt deposits
*A frequent smell of salt in the air
*Typically starts 100-500 metres from breaking surf such as is found on exposed coasts
*In the immediate vicinity of large expanses of calm salt water such as harbour foreshores


These environments may be extended inland by prevailing winds and local conditions.



This is a guide only and all information is retrieved from NZ Steel. For more in-depth information, click this link to view the Colorsteel website.